Base profile PVC for thermal insulation
A profile is used as a starting support lath for heat-insulating boards in ETICS. It’s installed horizontally along the perimeter of the building with a special hardware kit (dowel, connector, compensator). The profile takes the load of insulation boards, provides the removal of moisture from the system. Plastering of the hard-to-reach lower edge insulation is not required.
| Thickness of ETICS, mm | Length, m | Quantity per pack |
|---|---|---|
| 30 – 250 | 2,5 | 10-25 |
| Other profile sizes are available on request | ||
| Packaging: cardboard box | ||
Material:
Изготавливается из твердого ПВХ с перфорацией на задней и передней полках для фиксации дюбелями и для вывода влаги из системы.
The profile is used for finishing thermodynamic joints in ETICS . It is used as a covering profile for zones of displacement and tension (shrinkage-bending or shrinkage-compression) of two different bearing structures.
A profile used as a starting support lath for heat-insulating boards in ETICS. It’s installed horizontally along the perimeter of the building with a special hardware kit (dowel, connector, compensator). The profile takes the load of insulation boards, provides the removal of moisture from the system. Plastering of the hard-to-reach lower edge insulation is not required.