Fiberglassmesh 160 – 165 g
A facade reinforcement alkali-resistant mesh is a fiberglass mesh in woven form. It’s sized with polymeric composition to protect the glass fibers from alkaline corrosion and is designed for external and interior plastering (according to GOST R 55225-2012 Reinforcing Alkali-resistant Meshes of Glass Fibre for Building Faces).
| Cell, mm | Density g/sq. m | Tensile strength, H | Roll, sq. m |
|---|---|---|---|
| 4х4 / 5х5 | 165 | 2000 | 50 |
| 4х4 / 5х5 | 145-165 | 1500 – 1800 | 50 |
| 2х2 / 4х4 | 65-120 | 1000 – 1300 | 50 |
| 7х7 | 330 | 3600 | 25 |
The facade fiberglass mesh is designed for reliable reinforcement of the plaster layer on the building’s external walls. It has a number of distinctive characteristics which guarantee high stability and reliability of the plaster coating:
- has high resistance to tearing and stretching;
- contributes to overcoming internal stresses caused by sudden changes in temperature and humidity;
- is highly resistant to alkaline components even in conditions of high humidity, due to special polymer processing;
- protects the plaster layer surface from cracking under all climatic conditions.
The products have all the necessary approval documentation for their employment in construction activities in the Russian Federation.
Material:
A profile used as a starting support lath for heat-insulating boards in ETICS. It’s installed horizontally along the perimeter of the building with a special hardware kit (dowel, connector, compensator). The profile takes the load of insulation boards, provides the removal of moisture from the system. Plastering of the hard-to-reach lower edge insulation is not required.
Tubular plaster mesh is produced from glass thread and fiberglass rovings in cross weave with 4 mm cell size and 10-110 cm width.